(405) 806-1010

How to clean the kitchen tiles?

How to clean the kitchen tiles?
Bright Cleaning Queens

If the walls of your kitchen are tiled, you should take care of its cleaning from time to time. It is one of the most common ways to protect the walls of this room, since they are very decorative, resistant and thanks to them moisture, grease and dirt do not permeate the wall. But it stays on the tiles.
To make them look like the first day, it is essential to clean the tiles in the kitchen. They tend to go unnoticed in everyday life, but when they are stained and their colors no longer look the same, they completely delit this space, no matter how much everything else is pristine.
We give you several tips to make your work on the kitchen tiles as complete as possible... and without an over-effort in excessiveness:
Put order in your kitchen
The first thing to do is to move everything you have on the counter in the vicinity of these fires or the ceramic hob. That way you'll keep them from getting wet. You can also remove what hangs from the walls you intend to clean, and even pass the broom through the floor so that the dust doesn't cause any more trouble if it mixes with the water that falls from your cleanliness.
Use soap and water
Grab a sweep, fill it with water, pour some liquid soap and use it to do the basic cleaning. With your scouring, you can use the soft part to remove light and rough dirt to rub the most embedded dirt. Then remove the soap residue with a damp cloth and end up passing kitchen paper or a last clean, dry cloth.
Ammonia or vinegar
Ammonia will help you disinfect tiles or in cases where a lot of fat has accumulated. Prepare hot water mixed with this element, wear rubber gloves for cleaning, and ventilate the kitchen when cleaning. Rub the joints well, end up rinsing with water and end up drying with a cloth. In the case of vinegar, the procedure is similar (one part white vinegar by three hot water in the mixture) and review at the end with a soaked bayette.
To clean the joints
If the gaps between tile and tile have become blackened or soiled, keep in mind that you can return them to their original state with specific products. Another option is to use sodium bicarbonate. You'll use two tablespoons mixed with water until you get a paste, which you can apply with a toothbrush. After a few minutes, you should remove it with a sponge.
Get the shine back
Using a clean glass product you can make the tiles more shiny. If you do this once a week, the effort that will require you to keep the shine will be much less and these will remain in better condition for much longer.
Bright Cleaning Queens | 18 life-saving cleaning tricks